Hello,
I just installed the new FSiPanel 2020. It is running fine, connected to P3Dv4. But is doesn't detect any aircraft.
I tried PMDG 737NGXu, PMDG 777, iFly 737, Aerosoft Airbus, but none of the aircraft is being detected by FSiPanel 2020.
My troubleshooting tab seems to be ok?
What could be the route cause? How to solve the problem?
Detlef
No airplane detected in P3Dv4
Re: No airplane detected in P3Dv4
Hi,
Thanks for your report.
Could you post a picture of your FSiPanel 2020 directory?
I suspect a wrong version of Simconnect DLL.
Do you have P3D v4 and v5 installed on the same computer?
Cheers,
J-P
Thanks for your report.
Could you post a picture of your FSiPanel 2020 directory?
I suspect a wrong version of Simconnect DLL.
Do you have P3D v4 and v5 installed on the same computer?
Cheers,
J-P
Jean-Pierre Garraio
Developer
Developer
Re: No airplane detected in P3Dv4
One other pilot had same issue and the reason was an old version of P3D v4 installed.
Latest is 4.5 HF2, please double check your version.
Cheers
Latest is 4.5 HF2, please double check your version.
Cheers
Jean-Pierre Garraio
Developer
Developer
No airplane detected in P3Dv4
Attached the post of my FSiPanel 2020 dierctory.
Pls check if you can find any route cause.
I'm still using P3Dv4.4 and not the latest version 4.5. As I had trouble with some of the add-ons under 4.5, I switched back to 4.4. So I would prefer if we really can exclude any other reason for the problem before I trie again to install 4.5.
Thank you for your support.
Detlef
Pls check if you can find any route cause.
I'm still using P3Dv4.4 and not the latest version 4.5. As I had trouble with some of the add-ons under 4.5, I switched back to 4.4. So I would prefer if we really can exclude any other reason for the problem before I trie again to install 4.5.
Thank you for your support.
Detlef
Re: No airplane detected in P3Dv4
Hi Detlef,
Lockheed Martin is not providing anymore SDK for old versions of P3D unfortunately.
What is your exact version if you check on the menu About in P3D ?
Cheers,
J-P
Lockheed Martin is not providing anymore SDK for old versions of P3D unfortunately.
What is your exact version if you check on the menu About in P3D ?
Cheers,
J-P
Jean-Pierre Garraio
Developer
Developer
Re: No airplane detected in P3Dv4
I'm using P3D 4.4.16.27077
SimConnect Version 4.4.0.0
Detlef
SimConnect Version 4.4.0.0
Detlef
Re: No airplane detected in P3Dv4
Ok Detlef,
we can try something but without guarantee..
Replace LockheedMartin.Prepar3D.SimConnect.dll actual version with the one used by your sim version.
To do that:
Cheers,
J-P
we can try something but without guarantee..
Replace LockheedMartin.Prepar3D.SimConnect.dll actual version with the one used by your sim version.
To do that:
- Download the file below
- Replace the 2 DLL in the ZIP files in FSiPanel 2020 directory
Cheers,
J-P
You do not have the required permissions to view the files attached to this post.
Jean-Pierre Garraio
Developer
Developer
Re: No airplane detected in P3Dv4
It is working with the 'new' DLL files!
Thanks a lot for your support.
Detlef
Thanks a lot for your support.
Detlef