wrong course set for CYUL all approach's

Post Reply
Mach3
Posts: 3
Joined: Sat Feb 06, 2021 11:57 am

wrong course set for CYUL all approach's

Post by Mach3 »

Hello,

I was using FSiPanel 2020 today & am having a problem with approach's at CYUL (Montreal) airport.
When I select any of the runway the LOC course is 29 deg off what it should be, i.e. runway 06L is showing up as course 028 when it should be 057.

It's the same for all of the approach's at CYUL, I have tried them in the PMDG 737NGxu, 777 & the AS A320 all have the wrong course setup when trying to fly a approach.

I have updated the Airport Database in FSiPanel but this didn't fix the issue, I am also using the latest nav data from Navigraph.
My sim is P3D V4.5HF2 4.5.14.34698 using the Fly Tampa CYUL Airport.

Please let me know what I can do to fix this issue ?

Thanks Steven
jpgarraio
Site Admin
Posts: 698
Joined: Fri Sep 15, 2017 10:30 am

Re: wrong course set for CYUL all approach's

Post by jpgarraio »

Hi Steven,

Not sure what is the problem here, FSiPanel takes the LOC courses from P3D BGL files.
When you select the runway, do you see 057 or 058 as LOC course as below?
cyul1.jpg
FSiPanel will set the course shown above and imported from BGL files, if wrong, you can change it manually in FSiPanel database by going to Airport editor as shown below:
cyul2.jpg
FSiPanel will then set the new LOC course.

Let me know if that helped.

Cheers,

J-P
You do not have the required permissions to view the files attached to this post.
Jean-Pierre Garraio
Developer
Image
Post Reply