FSiPanel Crashes

Doc_Z
Posts: 33
Joined: Sun Jan 07, 2018 5:05 pm

FSiPanel Crashes

Post by Doc_Z »

I set up the FSLa320 at KRDN with engines running. Select an airport and vectors to final, push Move A/C. Setup begins,but when the plane is airborne, FSiPanel closes and leaves the airplane just hanging there.
jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

Re: FSiPanel Crashes

Post by jpgarraio »

Hi,

Thanks for your report, Does it crash always at the same time?
Could you please send me the file log.txt just after it crashed.
You can send it to support at fsipanel .com

Cheers,

J-P
Jean-Pierre Garraio
Developer
Image
Doc_Z
Posts: 33
Joined: Sun Jan 07, 2018 5:05 pm

Re: FSiPanel Crashes

Post by Doc_Z »

I will try to send it tomorrow, but it may not be until Monday.
Doc_Z
Posts: 33
Joined: Sun Jan 07, 2018 5:05 pm

Re: FSiPanel Crashes

Post by Doc_Z »

This doesn't happen every time, but most of the time with the FSL A320. It wouldn't allow me to attach a text file for some reason, but here it is:
22.02 10:05:21 FSiPanel is alive
22.02 10:05:21 FSiPanel Splash form Started
22.02 10:05:22 Configuration file read
22.02 10:05:22 P3D version detected : 5.1
22.02 10:05:27 Configuration file read
22.02 10:05:29 Simconnect ok
22.02 10:05:30 Simconnect ok
22.02 10:12:03 Conversion from string "---" to type 'Integer' is not valid.
jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

Re: FSiPanel Crashes

Post by jpgarraio »

Ok thanks,

It seems to be related to the reading of your FCU by FSiPanel.
When you click Move AC, do you press SPD button?
FSiPanel is changing mode from managed to select speed initially, it then set the desired speed, if speed mode is managed, this will fail.

Please try the following:

Click MOVE AC when speed mode is selected and do not touch anything except thrust levers to CLB, working?

Try another approach but this time set managed speed before clicking move AC, you should see FSiPanel reverting to select speed before setting everything.

Let me know,

Cheers
Jean-Pierre Garraio
Developer
Image
Doc_Z
Posts: 33
Joined: Sun Jan 07, 2018 5:05 pm

Re: FSiPanel Crashes

Post by Doc_Z »

I don't touch anything except Chaseplane views. I will try your idea.
Doc_Z
Posts: 33
Joined: Sun Jan 07, 2018 5:05 pm

Re: FSiPanel Crashes

Post by Doc_Z »

Tried twice more. Same result. FSPanel crashes as soon as aircraft starts moving. Here is latest log.

23.02 16:30:14 FSiPanel is alive
23.02 16:30:14 FSiPanel Splash form Started
23.02 16:30:15 Configuration file read
23.02 16:30:15 P3D version detected : 5.1
23.02 16:30:20 Configuration file read
23.02 16:30:21 Simconnect ok
23.02 16:30:22 Simconnect ok
23.02 16:41:36 Conversion from string "---" to type 'Integer' is not valid.
jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

Re: FSiPanel Crashes

Post by jpgarraio »

Ok thanks, do you have latest version of the FSLabs Airbus installed?
Jean-Pierre Garraio
Developer
Image
jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

Re: FSiPanel Crashes

Post by jpgarraio »

Or any hardware handling the FCU?
Jean-Pierre Garraio
Developer
Image
Doc_Z
Posts: 33
Joined: Sun Jan 07, 2018 5:05 pm

Re: FSiPanel Crashes

Post by Doc_Z »

Latest Airbus and no hardware.
Post Reply