Page 1 of 3

FSiPanel Crashes

Posted: Sat Feb 20, 2021 9:36 pm
by Doc_Z
I set up the FSLa320 at KRDN with engines running. Select an airport and vectors to final, push Move A/C. Setup begins,but when the plane is airborne, FSiPanel closes and leaves the airplane just hanging there.

Re: FSiPanel Crashes

Posted: Sun Feb 21, 2021 4:25 am
by jpgarraio
Hi,

Thanks for your report, Does it crash always at the same time?
Could you please send me the file log.txt just after it crashed.
You can send it to support at fsipanel .com

Cheers,

J-P

Re: FSiPanel Crashes

Posted: Sun Feb 21, 2021 5:13 am
by Doc_Z
I will try to send it tomorrow, but it may not be until Monday.

Re: FSiPanel Crashes

Posted: Mon Feb 22, 2021 5:16 pm
by Doc_Z
This doesn't happen every time, but most of the time with the FSL A320. It wouldn't allow me to attach a text file for some reason, but here it is:
22.02 10:05:21 FSiPanel is alive
22.02 10:05:21 FSiPanel Splash form Started
22.02 10:05:22 Configuration file read
22.02 10:05:22 P3D version detected : 5.1
22.02 10:05:27 Configuration file read
22.02 10:05:29 Simconnect ok
22.02 10:05:30 Simconnect ok
22.02 10:12:03 Conversion from string "---" to type 'Integer' is not valid.

Re: FSiPanel Crashes

Posted: Tue Feb 23, 2021 4:23 am
by jpgarraio
Ok thanks,

It seems to be related to the reading of your FCU by FSiPanel.
When you click Move AC, do you press SPD button?
FSiPanel is changing mode from managed to select speed initially, it then set the desired speed, if speed mode is managed, this will fail.

Please try the following:

Click MOVE AC when speed mode is selected and do not touch anything except thrust levers to CLB, working?

Try another approach but this time set managed speed before clicking move AC, you should see FSiPanel reverting to select speed before setting everything.

Let me know,

Cheers

Re: FSiPanel Crashes

Posted: Tue Feb 23, 2021 3:39 pm
by Doc_Z
I don't touch anything except Chaseplane views. I will try your idea.

Re: FSiPanel Crashes

Posted: Tue Feb 23, 2021 11:45 pm
by Doc_Z
Tried twice more. Same result. FSPanel crashes as soon as aircraft starts moving. Here is latest log.

23.02 16:30:14 FSiPanel is alive
23.02 16:30:14 FSiPanel Splash form Started
23.02 16:30:15 Configuration file read
23.02 16:30:15 P3D version detected : 5.1
23.02 16:30:20 Configuration file read
23.02 16:30:21 Simconnect ok
23.02 16:30:22 Simconnect ok
23.02 16:41:36 Conversion from string "---" to type 'Integer' is not valid.

Re: FSiPanel Crashes

Posted: Wed Feb 24, 2021 7:22 am
by jpgarraio
Ok thanks, do you have latest version of the FSLabs Airbus installed?

Re: FSiPanel Crashes

Posted: Wed Feb 24, 2021 7:23 am
by jpgarraio
Or any hardware handling the FCU?

Re: FSiPanel Crashes

Posted: Wed Feb 24, 2021 3:33 pm
by Doc_Z
Latest Airbus and no hardware.