Hi,
I have problems practicing CAT I landings with CAT I weather set by FSiPanel. I rarely can see 3 appr lights at 200 AGL.
I did some experiments in LOWI at dusk (for better visibility). Sitting at the threshold can barely see the 7th runway edge light making it an RVR of ~420 to 480, or?
Anyone with opinions on this?
Visibility too low p3d v5.1 non EA
Re: Visibility too low p3d v5.1 non EA
Hi,
Visibility is set exactly at the figures if you check on P3D, I agree with you that it should be a bit more though as runway is barely seen at minimum.
Maybe an option to increase min visibility by xx percent for calibrating could help?
Cheers,
J-P
Visibility is set exactly at the figures if you check on P3D, I agree with you that it should be a bit more though as runway is barely seen at minimum.
Maybe an option to increase min visibility by xx percent for calibrating could help?
Cheers,
J-P
Jean-Pierre Garraio
Developer
Developer
Re: Visibility too low p3d v5.1 non EA
That's what I suspected. Yes, some percentage calibration would be very helpful. Or accept a free numeric input value as alternative to the fixed quick values.
Thanks for this wonderful tool
Holger
Thanks for this wonderful tool
Holger
Re: Visibility too low p3d v5.1 non EA
I would like to come back to your wonderful idea of adding a kind of calibration for visibility .
Re: Visibility too low p3d v5.1 non EA
I have added it to the to-do list.
It will be a factor in the setup menu. For example 1.2 will add 20% more visibility.
Cheers,
J-P
It will be a factor in the setup menu. For example 1.2 will add 20% more visibility.
Cheers,
J-P
Jean-Pierre Garraio
Developer
Developer