FSiPanel forums

I keep getting this after updated FSI Panel today. Using 777 v1.11.x on P3D v5.1. Please help.... Many thanks!

I am sure my engines are started, weight is below MLW, and IRS is aligned..

Hi,

Thanks for your report, could you please try with latest update (automatic update on next start).
Same behavior?

Cheers,

J-P

Hi,

Sorry for the late reply. It works now. However, several problems were introduced after the update.

1. Although my wait set on PMDG 777 FMC is below MLW, FSiPanel still prompt for an overweight landing
2. After repositioned, FSiPanel flip-flopping A/T and Gear multiple times (I think it is due to the very low N1 thrust setting, I have to manually add thrust to help), leaving A/T and Gear switch in random positions after FSiPanel say the airplane is ready.

Please have a look.

Thanks!

Hi,

1: Confirm weight set in PMDG option MENU, not PERF menu.
Could you give me the type (200, 300ER) and weight giving the error.

2: No other feedback of this issue, can you by any chance produce a video of the event?

Cheers,

J-P

JP, thanks for your reply, and its always good to hear from you.

I have recorded the video. You can see the issues:

1. A/T arm switches keep flipping
2. Gear lever keeps toggling
3. N1 not moving
4. Multiple altitude resets

The final result is a bit random and each time is different.

https://vimeo.com/manage/videos/549542098

Hi,

Can you please check the link, this is to manage the video, I can't read it.

Cheers,

J-P

Hi,

Sorry.

https://vimeo.com/549542098

Please try again.

Thanks!

Thanks for the video.
I'm unable to reproduce that.

Could you tell me which airport / runway / position, I will then try to reproduce the behavior.

Cheers,

J-P

I am using the VHHH RWY07L, MLW 251t.

On a separate note, do you think my PMDG settings on hardware throttle always override autothrottle is the culprit?

That could be the case, I will try your approach / aircraft weight.
Can you try to do a positionning with your joystick disabled from P3D Menu? That should clearly tell us if the problem lies with your joystick inputs.

Cheers,

J-P