Hi
I just purchased the FsiPanel and after installation and activation was performing the Airport Update in Setup.
But I get a failure message:
"Error Downloading/copying MakeRunwys.exe not found..."
"runways.txt or runways.xml not found. Unable to continue"
Please help advise. Thank you.
Airport Dattabase Update Failure
Airport Dattabase Update Failure
You do not have the required permissions to view the files attached to this post.
Re: Airport Dattabase Update Failure
Hi,
Could you please check that FSiPanel has internet access.
Sometimes Windows defender or an antivirus suite is blocking.
Cheers,
J-P
Could you please check that FSiPanel has internet access.
Sometimes Windows defender or an antivirus suite is blocking.
Cheers,
J-P
Jean-Pierre Garraio
Developer
Developer
Re: Airport Dattabase Update Failure
Hi J-P,
Thank you for your quick response. Internet was available with defender turned off etc.
Interestingly after a while of just using FSiPanel without the Database Update, I checked the Setup again once more and found that the Database status showed as updated with date. And now everything is fine.
Thank you for developing this awesome application. I really love it. Makes flying approaches so much easier and interesting.
Warmest regards,
Athena
Thank you for your quick response. Internet was available with defender turned off etc.
Interestingly after a while of just using FSiPanel without the Database Update, I checked the Setup again once more and found that the Database status showed as updated with date. And now everything is fine.
Thank you for developing this awesome application. I really love it. Makes flying approaches so much easier and interesting.
Warmest regards,
Athena
Re: Airport Dattabase Update Failure
Hi J-P,
I have the same problem when I try to update my airports database.
I have updated P3D to the latest version (5.2), my internet connection is running correctly and the defender antivirus is off.
MakeRwys.exe is present in the P3D directory.
I have never had this problem before. Thank you for your help.
Andrea
I have the same problem when I try to update my airports database.
I have updated P3D to the latest version (5.2), my internet connection is running correctly and the defender antivirus is off.
MakeRwys.exe is present in the P3D directory.
I have never had this problem before. Thank you for your help.
Andrea
You do not have the required permissions to view the files attached to this post.
Re: Airport Dattabase Update Failure
Hi,
Just tried and it worked on my side.
Bitdefender however blocked FSiPanel internet, I had to allow it in the antivirus menu.
Update worked normally.
Could you please try again and post log.txt for troubleshooting.
Cheers,
J-P
Just tried and it worked on my side.
Bitdefender however blocked FSiPanel internet, I had to allow it in the antivirus menu.
Update worked normally.
Could you please try again and post log.txt for troubleshooting.
Cheers,
J-P
Jean-Pierre Garraio
Developer
Developer
Re: Airport Dattabase Update Failure
J-P thanks for your reply.
It's fanny because yesterday evening for any logical reason and without forcing the update by pushing the relative button, the database has updated correctly.
Anyhow I attache the content of log.txt for your information.
24.06 20:53:50 FSiPanel is alive
24.06 20:53:50 FSiPanel Splash form Started
24.06 20:53:50 FSiPanel will use custom made database
24.06 20:53:50 Configuration file read
24.06 20:53:50 P3D version detected : 5.1
24.06 20:53:53 Configuration file read
24.06 20:53:57 Simconnect ok
24.06 20:53:59 Simconnect ok
24.06 20:56:06 Customer is registered
24.06 20:56:06 Previous failures cleared if any
24.06 20:56:06 Landing Report reset and armed
24.06 20:56:06 Simconnect is available and After landing flow disabled for now
24.06 20:56:06 Ready to start approach :0
Regards, Andrea
It's fanny because yesterday evening for any logical reason and without forcing the update by pushing the relative button, the database has updated correctly.
Anyhow I attache the content of log.txt for your information.
24.06 20:53:50 FSiPanel is alive
24.06 20:53:50 FSiPanel Splash form Started
24.06 20:53:50 FSiPanel will use custom made database
24.06 20:53:50 Configuration file read
24.06 20:53:50 P3D version detected : 5.1
24.06 20:53:53 Configuration file read
24.06 20:53:57 Simconnect ok
24.06 20:53:59 Simconnect ok
24.06 20:56:06 Customer is registered
24.06 20:56:06 Previous failures cleared if any
24.06 20:56:06 Landing Report reset and armed
24.06 20:56:06 Simconnect is available and After landing flow disabled for now
24.06 20:56:06 Ready to start approach :0
Regards, Andrea
Re: Airport Dattabase Update Failure
Thanks Andrea,
Might be a server issue at the time you tried the update.
Cheers
Might be a server issue at the time you tried the update.
Cheers
Jean-Pierre Garraio
Developer
Developer
Re: Airport Dattabase Update Failure
Hi JP,
I'm getting exactly the same error today. I'll try again tomorrow.
Never had this problem before.
Dave
July 23 : Still same problem, even after complete re-install.
Aug 15 : I still have not been able to get this to work.
I'm getting exactly the same error today. I'll try again tomorrow.
Never had this problem before.
Dave
July 23 : Still same problem, even after complete re-install.
Aug 15 : I still have not been able to get this to work.
Re: Airport Dattabase Update Failure
Bump
This still doesn’t work.
Regards,
Dave
This still doesn’t work.
Regards,
Dave
Re: Airport Dattabase Update Failure
Hi Dave,
I will be looking at it this morning.
I keep you posted today.
Cheers,
J-P
I will be looking at it this morning.
I keep you posted today.
Cheers,
J-P
Jean-Pierre Garraio
Developer
Developer