MaddogX not on Paths list

Any discussion related to FSiPanel 2017
Post Reply
alpha117
Posts: 23
Joined: Mon Sep 03, 2018 7:57 pm

MaddogX not on Paths list

Post by alpha117 » Tue Sep 08, 2020 6:20 am

The path is not on the 'list'.

Press 'locate new Addons' does not add the maddogX to the paths list


Thanks

CLive

jpgarraio
Site Admin
Posts: 562
Joined: Fri Sep 15, 2017 10:30 am

Re: MaddogX not on Paths list

Post by jpgarraio » Tue Sep 08, 2020 4:58 pm

Hi,

Just installed the latest version received, flew approaches without issues..
When you look for the path, are you looking under P3D V5?

no other reports of problem on the MD82, wondering why you have problem on MD82, FSLabs and PMDG 737 NGXu, must be a common issue.

Regards,

J-P

alpha117
Posts: 23
Joined: Mon Sep 03, 2018 7:57 pm

Re: MaddogX not on Paths list

Post by alpha117 » Tue Sep 08, 2020 8:27 pm

Point to the aircraft.cfg not the issue.
Setup > Paths does not show the path for the Md82
I have paths for prepar3D, PMDG, Ifly, Fslabs and QuaalityWings but no MaddogX

jpgarraio
Site Admin
Posts: 562
Joined: Fri Sep 15, 2017 10:30 am

Re: MaddogX not on Paths list

Post by jpgarraio » Wed Sep 09, 2020 6:03 pm

Ok, where is your MD82 installed ?
Normally if the path is not found, FSiPanel will not import the aircraft..

P3D V5, Maddog MD82, default installation path ?

Cheers,

J-P

alpha117
Posts: 23
Joined: Mon Sep 03, 2018 7:57 pm

Re: MaddogX not on Paths list

Post by alpha117 » Wed Sep 09, 2020 6:27 pm

Sure is, I get a dialogue box that asks me to point to the aircraft.cfg, which is:

C:\Users\Administrator\Documents\Prepar3D v5 Add-ons\MaddogX\SimObjects\Airplanes\MaddogX
I point to that and it adds the aircraft, no problems

jpgarraio
Site Admin
Posts: 562
Joined: Fri Sep 15, 2017 10:30 am

Re: MaddogX not on Paths list

Post by jpgarraio » Thu Sep 10, 2020 10:19 am

Thanks, just sent you an email with a beta version to test.
Changed the path detection and added the information on the setup page.

Cheers,

J-P

alpha117
Posts: 23
Joined: Mon Sep 03, 2018 7:57 pm

Re: MaddogX not on Paths list

Post by alpha117 » Thu Sep 10, 2020 12:24 pm

tested and replied via email with the issues

Clive

alpha117
Posts: 23
Joined: Mon Sep 03, 2018 7:57 pm

Re: MaddogX not on Paths list

Post by alpha117 » Wed Sep 16, 2020 6:33 pm

This is now resolved

Thanks JP

jpgarraio
Site Admin
Posts: 562
Joined: Fri Sep 15, 2017 10:30 am

Re: MaddogX not on Paths list

Post by jpgarraio » Sat Sep 19, 2020 5:48 pm

Great Thanks for your support and feedback while fixing it.

Post Reply