FSiPanel Crashes

jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

Re: FSiPanel Crashes

Post by jpgarraio »

Thanks, Can you try another airport on a stock scenery (not a 3rd party scenery).
Jean-Pierre Garraio
Developer
Image
DavidP
Posts: 5
Joined: Wed Feb 28, 2018 2:29 am

Re: FSiPanel Crashes

Post by DavidP »

jpgarraio wrote: Mon Mar 01, 2021 8:16 pm Thanks, Can you try another airport on a stock scenery (not a 3rd party scenery).
I disabled ORBX Global Base but left YMML active.

I have uninstalled FSiPanel and am currently trying to reinstall but I don't receive the return email for activation code (my email was correct).

I ran "Delete Generated Files.exe" in the root P3D folder to see if I could clean things up a bit.
jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

Re: FSiPanel Crashes

Post by jpgarraio »

Thanks, the new version 1.0.0.26 will give an extended log file.
If FSiPanel crashes, please post your log.txt file, it will help me understand where the problem could be.

Cheers
Jean-Pierre Garraio
Developer
Image
DavidP
Posts: 5
Joined: Wed Feb 28, 2018 2:29 am

Re: FSiPanel Crashes

Post by DavidP »

jpgarraio wrote: Tue Mar 02, 2021 7:59 am Thanks, the new version 1.0.0.26 will give an extended log file.
If FSiPanel crashes, please post your log.txt file, it will help me understand where the problem could be.

Cheers
Hi J-P

Well I received my verification email and now everything is good. I must have had some sort of corruption that "Delete Generated Files.exe" fixed because I also noticed a marked reduction in loading time as well.

I just completed my scenario in the 777 perfectly well so I guess that my issue can be considered closed.

Thanks for your help.

David
jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

Re: FSiPanel Crashes

Post by jpgarraio »

Great Thanks!
Safe landings
Jean-Pierre Garraio
Developer
Image
jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

Re: FSiPanel Crashes

Post by jpgarraio »

Hi Doc_z,

How about your A320 experience with last release?
Do you still have the same issue, FSiPanel crashing?

Cheers,

J-P
Jean-Pierre Garraio
Developer
Image
Doc_Z
Posts: 33
Joined: Sun Jan 07, 2018 5:05 pm

Re: FSiPanel Crashes

Post by Doc_Z »

No change. Crashed as soon as aircraft is moved off the ground.

02.03 09:58:08 FSiPanel is alive
02.03 09:58:08 FSiPanel Splash form Started
02.03 09:58:09 Configuration file read
02.03 09:58:09 P3D version detected : 5.1
02.03 09:58:13 Configuration file read
02.03 09:58:15 Simconnect ok
02.03 09:58:16 Simconnect ok
02.03 09:59:06 Customer is registered
02.03 09:59:06 Previous failures cleared if any
02.03 09:59:06 Landing Report reset and armed
02.03 09:59:06 Simconnect is available and After landing flow disabled for now
02.03 09:59:06 Ready to start approach :0
02.03 09:59:27 Conversion from string "---" to type 'Integer' is not valid.
jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

Re: FSiPanel Crashes

Post by jpgarraio »

Ok, can't figure out why, nobody else has the same issue.
FSiPanel tries to change values on your FCU, setting speed window from Managed to Selected in order to set the correct speed but for unknown reason the speed selector stays in Managed mode, showing --- instead of a speed value.


Could you please try to uninstall and reinstall FSUIPC latest version
http://fsuipc.simflight.com/beta/FSUIPC6.zip

Then try an approach, same behavior?
Cheers,

J-P
Jean-Pierre Garraio
Developer
Image
Doc_Z
Posts: 33
Joined: Sun Jan 07, 2018 5:05 pm

Re: FSiPanel Crashes

Post by Doc_Z »

Installed fresh FSUIPC. I got up in the air, but 320 stalled. FSI crashed.

02.03 15:34:17 FSiPanel is alive
02.03 15:34:17 FSiPanel Splash form Started
02.03 15:34:18 Configuration file read
02.03 15:34:18 P3D version detected : 5.1
02.03 15:34:21 Configuration file read
02.03 15:34:23 Simconnect ok
02.03 15:34:25 Simconnect ok
02.03 15:34:48 Customer is registered
02.03 15:34:48 Previous failures cleared if any
02.03 15:34:48 Landing Report reset and armed
02.03 15:34:48 Simconnect is available and After landing flow disabled for now
02.03 15:34:48 Ready to start approach :0
02.03 15:35:10 Conversion from string "---" to type 'Integer' is not valid.
jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

Re: FSiPanel Crashes

Post by jpgarraio »

Ok, so FSiPanel can not interfere with your Airbus for an unknown reason.
It seems to be working for all other users, do you have any special installation running at the same time as P3D, FSLabs and FSiPanel?

I will contact you by email for some further testing.

Cheers,

J-P
Jean-Pierre Garraio
Developer
Image
Post Reply