Scenarios P3D Advanced Edition Active Sky connection

Post Reply
EZYTWIV
Posts: 14
Joined: Mon Jun 07, 2021 11:16 am

Scenarios P3D Advanced Edition Active Sky connection

Post by EZYTWIV »

Hi all,

I am trying to run scenario 1 for FSLabs on P3Dv5. I am using the procedure sequence as published but once I select Start Training the weather does not get injected into the sim. Are there any more specific Active Sky or P3D settings required? Active Sky shows connected with P3D. I tried both Live mode and Historical mode. But the Weather button does not change into ActiveSky so there seems to be no connection between PSiPanel and Active Sky even though I started Active Sky first.

When I select the Send Weather button, nothing happens either.

Best regards,

Vincent

PS the Scenario set QNH was preselected to 1022 on the FSiPanel UI, while it states 1032 on the pop up window.
jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

Re: Scenarios P3D Advanced Edition Active Sky connection

Post by jpgarraio »

Hi,

Do you have ActiveSky running on the same computer as FSiPanel?

Cheers,

J-P
Jean-Pierre Garraio
Developer
Image
EZYTWIV
Posts: 14
Joined: Mon Jun 07, 2021 11:16 am

Re: Scenarios P3D Advanced Edition Active Sky connection

Post by EZYTWIV »

Yes I only have one PC, no network,
jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

Re: Scenarios P3D Advanced Edition Active Sky connection

Post by jpgarraio »

Ok, If you do the following :
  • Start ActiveSky
  • Start P3D
  • Start FSiPanel
Do you see a green ACTIVE SKY button on FSiPanel main screen?
asngreen.jpg
if not, can you check under ActiveSky / general options / http web request port that you have 19285.

Cheers,

J-P
You do not have the required permissions to view the files attached to this post.
Jean-Pierre Garraio
Developer
Image
EZYTWIV
Posts: 14
Joined: Mon Jun 07, 2021 11:16 am

Re: Scenarios P3D Advanced Edition Active Sky connection

Post by EZYTWIV »

Thanks you JP,

The port number was causing the problem. Everything is working fine now. It was a lot of fun to run the scenario.

Vincent

PS: at the end when the ATC box shows Fire Services are on their way, maybe for UGCX users you could send a command to UGCX so a fire truck actually arrives as well (:
jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

Re: Scenarios P3D Advanced Edition Active Sky connection

Post by jpgarraio »

Great !
On the next update, you will be able to enter ActiveSky PORT in FSiPanel for non-standard config.

I have to look at UGCX, I don't know it :-)

Cheers,

J-P
Jean-Pierre Garraio
Developer
Image
Post Reply