FMC not complete when fying star.

Post Reply
Hobbsy
Posts: 14
Joined: Mon May 07, 2018 4:28 pm

FMC not complete when fying star.

Post by Hobbsy »

Hi JP, I am flying the 737 800 ngxu on P3Dv5.3 and using FsiPanel Standard Edition and have a problem with loading and flying a Star.
After loading my a/c at the destination airport and runway and choosing my star and start point, the NGXU loads in at the requested alt and location but my FMC is only set up for a start at a discontinuity and then a final approach waypoint, so I have to input all the waypoints (incuding my start wp) up to that approach waypoint.
Any suggestions as to what I may be doing wrong?
Regards,
jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

Re: FMC not complete when fying star.

Post by jpgarraio »

Hi,

You're doing nothing wrong, FSiPanel does not set the STAR on the FMC, only the ILS approach if available at the airport.
Too many possible transitions on a STAR, reason why I left it to the pilot.

Cheers,

J-P
Jean-Pierre Garraio
Developer
Image
Hobbsy
Posts: 14
Joined: Mon May 07, 2018 4:28 pm

Re: FMC not complete when fying star.

Post by Hobbsy »

Hi JP, yes, after doing a bit more searching I found your video on how to fly a star with the b737, so my fault for not taking a bit more time searching. Thanks anyway for replying.
Regards,
Post Reply