Hold Brakes for 3 seconds.

Post Reply
DcrFlight22
Posts: 2
Joined: Mon Dec 12, 2022 3:27 am

Hold Brakes for 3 seconds.

Post by DcrFlight22 »

I have never had this problem. When i set up a scenario, specifically a RNP RNAV approach. When it says Hold brakes for 3 seconds, it automatically turns the flight over to me with no pressing of the brakes so I am unable to set other parameters. Any idea what could be the cause. Never experienced this until now. Thanks.
jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

Re: Hold Brakes for 3 seconds.

Post by jpgarraio »

Hi,

Thanks for your message!

Did you have parking brake ON when pushing MOVE AC?
Any joystick axis, buttons assigned to brakes maybe?

During the trimming phase, can you have a look at your brake pedals, are they pushed ?

Cheers,

J-P
Jean-Pierre Garraio
Developer
Image
DcrFlight22
Posts: 2
Joined: Mon Dec 12, 2022 3:27 am

Re: Hold Brakes for 3 seconds.

Post by DcrFlight22 »

J-P at some point it does appear that my brakes got set somehow, whatever i did. I had to do some resets in my saved state for FSIPanel and it seems to have solved the problem. I had checked it one time and when i pressed move A/C they were not set but it was reading that they were. I will try a few more scenarios and be sure the problem is solved. Thanks so much for your time Sir.

DCR
Post Reply