Problems with iFly 737MAX8

[TrevorWilliam]

I am using FS2020 and the iFly 737MAX 8 for 2020.I load the plane on the runway, click on FSI icon inside the sim and then open FSI program. I then set up an approach once the plane is identified and click on "move aircraft". FSI then says it is setting up - but it does NOT set up the MCP autopilot and FMC radios.
I tested with the CRJ 900v2 and all works fine BUT NOT the ifly max8. Please help - thanks

[TrevorWilliam]

I am using FS2020 and the iFly 737MAX 8 for 2020.I load the plane on the runway, click on FSI icon inside the sim and then open FSI program. I then set up an approach once the plane is identified and click on "move aircraft". FSI then says it is setting up - but it does NOT set up the MCP autopilot and FMC radios.
I tested with the CRJ 900v2 and all works fine BUT NOT the ifly max8. Please help - thanks

[wizav]

Hey there

MAX 8 is not setting radios for AP by default, it's something you need to set up in iflys tablet, and then it should work properly.

[jpgarraio]

Hi,

Do you still have the issue with the MAX 8 ?
Did you restart the sim when the MAX8 was discovered?

Regards,

J-P