PMDG 737 keeps flying while setting up the aircraft

[SmartFlyer]

PMDG 737 does not return to its initial position while FSIPanel is setting up the aircraft.
Even when waiting to take over the control, the aircraft keeps flying.
I started the PMDG 737 in taxi state before launching FSIPanel.
No issue when I did the same "Long Final" to the same airport (EDDH runway 23 ) with the Fenix A319.

FSIPanel version : 1.0.0.131
Hardware : TCA quadrant Airbus Pilot + TCA Sidestick X Pilot

[jpgarraio]

Hi,

No issues here, please check that your parking brake is OFF and no assigned ghost brake inputs.
FSiPanel will release position freeze when any brake pressure is detected.

Regards,

J-P

[SmartFlyer]

Hi J-P,

I checked the parking brake and they are OFF.
I use SPAD.Next to control my TCA throtlle quadrant. I see no ghost brake events.
I reinstalled PMDG-737 800 and FsiPanel.
I can work around the problem by manually freeze the position in the sim control panel after I pushed "Move AC".

Kind regards,
SmartFlyer

[SmartFlyer]

Seems to be solved in version 1.0.0.135.

[wizav]

After few landings it starts happening IDK why but I've learned to live with it

[jpgarraio]

Maybe residual braking, try the following, when FSiPanel starts the configuration, aircraft in the air, push and release once your brakes.
Same thing?

Regards,

J-P