PMDG 737-800 Zurich low visibility runway 14

Snapshots for the PMDG Boeing 737
Please make sure to download snapshot corresponding to the exact variant!
Post Reply
jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

PMDG 737-800 Zurich low visibility runway 14

Post by jpgarraio »

This snapshot will position you a few miles before waypoint GIPOL in Zurich Switzerland.
Your FMC will be programmed and LNAV / VNAV should be armed.
Minimums are set at 50ft RADIO for a CAT III approach as per the chart.
Once release, set altitude 4000ft and the aircraft will fly the arrival for this approach.
If you have a 3rd party scenery for LSZH, the ILS frequency for runway 14 will be 111.75.
If you have the default P3D scenery, please change the ILS frequency to 108.30

If using FSiPanel WX engine, the weather will be set to meet the CAT III visibility.
If you use ActiveSky, please select the weather before selecting the Snapshot.

Happy landing!
PMDG737LowVis_LSZH_P3DV4.FSiPanel
You do not have the required permissions to view the files attached to this post.
Jean-Pierre Garraio
Developer
Image
Juergen2
Posts: 15
Joined: Mon Apr 23, 2018 6:55 pm

Re: PMDG 737-800 Zurich low visibility runway 14

Post by Juergen2 »

JP,
I am trying to import this snapshot, but get the following error: Unable to import the snapshot, check red items above for mismatch. The Variant 737-800WL is highlighted in red, even though I have the PMDG 737-800NGX PMDG House F30@65300kgs selected
I have P3Dv4 running and the PMDG House B737-800NGX is sitting at the default airport.
I than drag and drop the "PMDG737LowVis_LSZH P3Dv4 FSiPanel". Still the variant: 737-800WL is highlighted in RED.
Thanks for help
Brgds
Juergen Mader
jpgarraio
Site Admin
Posts: 1234
Joined: Fri Sep 15, 2017 10:30 am

Re: PMDG 737-800 Zurich low visibility runway 14

Post by jpgarraio »

Hi,

Are you using a Winglets version of the 737?

J-P
Jean-Pierre Garraio
Developer
Image
Juergen2
Posts: 15
Joined: Mon Apr 23, 2018 6:55 pm

Re: PMDG 737-800 Zurich low visibility runway 14

Post by Juergen2 »

Hi JP
I used the PMDG737-800NGX PMDG House F30@65300kgs by mistake.
I can import if the winglet version is selected.
Thanks for help
Brgds
Juergen Mader
Post Reply