Fsipanel latest update

Any discussion related to FSiPanel 2017
Post Reply
Bryan
Posts: 13
Joined: Sat Aug 04, 2018 1:31 am

Fsipanel latest update

Post by Bryan » Sat Jan 12, 2019 8:56 pm

Hi JP,

Having no luck with the latest update of FSIPanel. The PMDG 747 v3 0 will not successfully hold the localiser once captured.

The 747 monetarily captures the localizer but then disengages, this happens at EGLL and EDDF both Aerosoft airports.

At the default LFPO Runway 26 FSIPanel is not even lining up with the approach course correctly even though according to the navigraph charts FSIPanel has the correct final approach course.

The FSLABS a320 at least captures the localiser but then performs a series of s curves even though it is lined correctly with the runway.

Have uninstalled and reinstalled and have also rebuilt the database to no avail.

All in all pretty unusable at the moment.

Would appreciate help in getting this sorted out.

Bryan.

jpgarraio
Site Admin
Posts: 347
Joined: Fri Sep 15, 2017 10:30 am

Re: Fsipanel latest update

Post by jpgarraio » Sun Jan 13, 2019 11:23 am

Hi Bryan,

Which sim? P3D?

Do you have your joystick axis calibrated? usually a wrong position or autopilot disconnecting is due to an input on the flight control while autopilot is engaged. If you import aircraft when the flight controls are not properly centered and joystick calibrated, you will have issues.

Cheers,

J-P

Bryan
Posts: 13
Joined: Sat Aug 04, 2018 1:31 am

Re: Fsipanel latest update

Post by Bryan » Sun Jan 13, 2019 1:35 pm

Hi JP

Sim is P3D V4. Autopilot never disconnects, it's the localizer tracking that's the problem.

As far as I'm aware all the controls were calibrated and centered when the aircraft were imported, but I will try again to make sure.


Bryan.

Post Reply