P3D V5 HF1

Any discussion related to FSiPanel 2017
Post Reply
SquadronLeader
Posts: 8
Joined: Mon May 28, 2018 11:26 am

P3D V5 HF1

Post by SquadronLeader » Sat May 09, 2020 10:46 am

Now that PMDG has released the 747 for P3D V5, I went to set the aircraft up in FsiPanel. I thought this had been updated to work with P3D V5 - have I got that wrong? - as FsiPanel did not show any of the plane variants or liveries.

Yellmmer
Posts: 2
Joined: Sun Nov 04, 2018 6:42 pm

Re: P3D V5 HF1

Post by Yellmmer » Sun May 10, 2020 7:22 am

I have similar problem - no aircraft available for import. I have instaled B747 which is recognized according to log.txt (showing panelstate path properly). Pop down window showns only "Basic Mode Aicraft"...

jpgarraio
Site Admin
Posts: 493
Joined: Fri Sep 15, 2017 10:30 am

Re: P3D V5 HF1

Post by jpgarraio » Sun May 10, 2020 12:30 pm

Hi,

I'm working on it, I just installed the 747 on V5 and i will be running tests shortly.
FSiPanel is ready for P3D V5 but not sure that all addons will work out of the box. I need to test them.

Cheers,

J-P

SquadronLeader
Posts: 8
Joined: Mon May 28, 2018 11:26 am

Re: P3D V5 HF1

Post by SquadronLeader » Mon May 11, 2020 6:57 am

Many thanks J-P

craig_read
Posts: 2
Joined: Thu Nov 22, 2018 5:53 pm

Re: P3D V5 HF1

Post by craig_read » Mon May 11, 2020 10:06 am

Just out of interest, you've not released an installer that is P3D v5 compatible right? I ask because I have the latest from the website and it's refusing to find P3D V5. If this is to be expected I will just hold off for now :)

Cheers

Craig

Yellmmer
Posts: 2
Joined: Sun Nov 04, 2018 6:42 pm

Re: P3D V5 HF1

Post by Yellmmer » Tue May 12, 2020 4:09 pm

Thank you J-P for your effort.

jpgarraio
Site Admin
Posts: 493
Joined: Fri Sep 15, 2017 10:30 am

Re: P3D V5 HF1

Post by jpgarraio » Thu May 21, 2020 2:41 pm

The PMDG 747 is flying perfectly with FSiPanel on P3D V5 !
Multiple approaches without restarting the SIM are possible again!

Expect release of new FSiPanel version tonight.

Cheers,

J-P

Post Reply