Speed with flaps 15/30/40

Any discussion related to FSiPanel 2017
Post Reply
fmulder
Posts: 2
Joined: Wed Feb 26, 2020 2:25 pm

Speed with flaps 15/30/40

Post by fmulder » Sun May 24, 2020 2:06 pm

I have the following problem: When I start a landing with FSi with my PMDG 737 NGXu, the flap/speed setting in the FMC is very very low: 15/121, 30/115 and 40/108. I cannot change this in the FMC. How do I change this in the correct settings?
Any help is greatly appreciated!
Frans

jpgarraio
Site Admin
Posts: 517
Joined: Fri Sep 15, 2017 10:30 am

Re: Speed with flaps 15/30/40

Post by jpgarraio » Sat May 30, 2020 7:52 am

Hi,

The speeds are supposed to be correct as per the weight of the aircraft.
When you click MOVE AC on FSiPanel, what is your aircraft weight when taking over the controls?

Cheers,

J-P

fmulder
Posts: 2
Joined: Wed Feb 26, 2020 2:25 pm

Re: Speed with flaps 15/30/40

Post by fmulder » Sun Jun 07, 2020 9:52 am

The weight is zero.....The planeI use is a B737 PMDG NGXu, fully congigured as you explained in the manual
But when I click MOVE the airplane loses all the weight and the ACT PERF INIT page in the FMC says:
- GW/CRZ CG: 9.0/28%
- ZFW: 0,0
- reserves 0,0
- Cost index: 1090513635

jpgarraio
Site Admin
Posts: 517
Joined: Fri Sep 15, 2017 10:30 am

Re: Speed with flaps 15/30/40

Post by jpgarraio » Wed Jun 10, 2020 9:14 am

Ok thanks, could you please send me the following files just after you positioned the 737 on approach.

- config.txt
- log.txt

Please send them to support at FSiPanel.com

Cheers,

J-P

Post Reply