FSiPanel forums

Hi there - for some unknown reason, I cannot load the latest Dublin to Heathrow training mission? All other missions with all aircraft work fine but when I click the launch button that normally starts the loading sequence to the aircraft, it just crashes FsiPanel? Any help gratefully received..
Bazz

Hi,

Could you please tell me which aircraft?
I will give it a shot

Cheers,

J-P

Hi JP - PMDG 737 (700 and 900), Fenix A320 and Maddog
Thanks
Bazzz

Ok thanks, can you try to import the scenario again for the aircraft you would like to fly?

Open the scenario Manager, select PMDG 737-800 for example, click on the Dublin scenario and Download.
It will install a fresh one, they try it.

Same issue ?

If yes, when FSiPanel closes, send me the file log.txt at support at fsipanel.com

Cheers,

J-P

Hi J-P, and greetings from Australia. I loaded a new Dublin scenario for the 737-800 as you suggested, and tried to launch in MSFS with the battery and ground power as normal, but unfortunately with the same result - FsiPanel simply crashes/closes.
Unfortunately, I do not know how to find (or where to look) for the file log.txt that you requested. Can you help me do that?

Thanks

Bazzz

Thanks, the file is in FSiPanel directory, where the software is installed.
Make sure to send me the file just after FSiPanel had crashed, new file created on every FSiPanel startup.

Cheers,

J-P

Hey J-P, thanks for the speedy response, I appreciate it.
log.txt below:

09.12 21:39:42 FSiPanel is alive
09.12 21:39:42 FSiPanel Splash form Started
09.12 21:39:44 Configuration file read
09.12 21:39:44 Navigraph DB found
09.12 21:39:48 Configuration file read
09.12 21:39:48 Navigraph DB found
09.12 21:39:49 FSiPanel 2020 MSFS Advanced Edition
09.12 21:39:49 downloading metar file
09.12 21:39:53 metar file downloaded
09.12 21:39:54 Simconnect ok
09.12 21:39:54 Select APT ICAO : EIDW
09.12 21:39:54 Using NavigraphDB
09.12 21:39:54 Airport Found
09.12 21:39:54 City:DUBLIN INTL
09.12 21:39:54 Country:Ireland
09.12 21:39:54 magvar:-2
09.12 21:39:54 Name:DUBLIN INTL
09.12 21:39:54 Keyboard scan enabled
09.12 21:39:55 Simconnect ok
09.12 21:40:21 downloading scenario
09.12 21:40:56 Object reference not set to an instance of an object.

Thanks
Bazzz

Hey,

Thanks for the info, that looks strange, can you download for example the latest scenario CCM351 in Marseille, do you have same result?
Did you change something on your joystick or audio configuration ?

A good idea would be to delete config.xml in FSiPanel directory, then restart FSiPanel, set your scenarios settings, PTT, Say again, etc.
Try to download and fly a scenario.

Regards,

J-P

Hi J-P - here's the log.txt file for the LFML flight which works perfectly. The EIDW flight still crashes FSIPanel despite having deleted the config.xml file and restarting the scenario settings.
Still hoping there may be a solution? Have a great weekend...

Bazzz

10.12 07:38:14 FSiPanel is alive
10.12 07:38:14 FSiPanel Splash form Started
10.12 07:38:16 Configuration file read
10.12 07:38:16 Navigraph DB found
10.12 07:38:20 Configuration file read
10.12 07:38:20 Navigraph DB found
10.12 07:38:21 FSiPanel 2020 MSFS Advanced Edition
10.12 07:38:21 downloading metar file
10.12 07:38:25 metar file downloaded
10.12 07:38:26 Simconnect ok
10.12 07:38:26 Select APT ICAO : LFML
10.12 07:38:26 Using NavigraphDB
10.12 07:38:26 Airport Found
10.12 07:38:26 City:MARSEILLE/PROVENCE
10.12 07:38:26 Country:France
10.12 07:38:26 magvar:2
10.12 07:38:26 Name:MARSEILLE/PROVENCE
10.12 07:38:26 Keyboard scan enabled
10.12 07:38:27 Simconnect ok

Hi,

Could you try the following:

• Delete the file scenarios.db

• Start FSiPanel, go to SETUP / Scenario Manager and import the Dublin Scenario for the aircraft you want to fly

Try now, same error ??